CCTREE PETG Filament 1.75 mm 1 kg, Exceptional Toughness and Excellent Transparency, Dimensional Accuracy +/- 0.03 mm, with Most 3D Printers, Glow in the Dark Blue

CCTREE PETG 3D Printer Filaments are using 100% virgin and environmentally friendly resin and colourants. CCTREE does not include any cheap plastic fillers or regrind. The filament is vacuum sealed with desiccant to protect it from moisture. The printing temperature of PETG is higher than PLA. Be sure to print with a heating bed, and in a well-ventilated space.

CCTREE is using advanced spooling technique aiming to make orderly wind and tangle-free filament. The filaments are universally designed and compatible with 3D printers using 1.75 mm diameter filament, with a dimensional accuracy of +/- 0.05 mm. It is the official partner of Creality CR-10S. Also, It is the " default " recommended filaments for many desktop and industrial 3D printers. It has the following characteristics:

Good toughness, high strength, high durability and a capacity to withstand high temperatures.
Without nozzle clogging, Easy stick to the hot bed applied with washable glue stick or craft glue
Low shrinkage, thermoforming dimensional stability


The data are intended as a general guide only and do not necessarily represent results that may be obtained elsewhere.

Diameter: 1.75 mm.
Default nozzle diameter: 0.4 mm.
Tolerance: ± 0.03 mm.
Extruder type: direct drive/bowden tube.
Net weight: 1 kg.
Layer height: 0.1-0.3 mm.
Shipping weight: 1.2 kg.
Printing temperature: 220-240°C (428-464°F).
Shipping size: 21 x 21 x 7 cm.
Bed temperature: 50-70°C (122-158°F).
Tensile strength: 50 Mpa.
Cooling fan: required.
Impact strength: 7.9 J/m2, Izod.
Retraction speed: 30-50 mm/s.
Surface finish: Glossy & Translucent
Retraction distance: 3-8 mm.
Spool size: diameter 195 mm + inner hub 55 mm + height 60 mm.