Dolphin Automotive DFM400F Front Parking Sensors With Longer Leads. Flush Fit OEM Style 4 Sensor Audio Alert Kit With Rocker Switch (Gloss Black)

The Dolphin DFM400F is a 4 flush mounting FRONT sensor system manufactured to fit a wide range of cars and look like original fit equipment. This kit has 4 sensors with a buzzer. The buzzer gives audible bleeps with increasing frequency as you get closer to an obstacle.

The unit is switched via a small rocker switch on the dashboard which is included with the kit, this is so that you manually turn the sensors on, as and when you need to use them. When the vehicle is less than 1.5 metres from the obstruction the audible alert will emit intermittent bleeps. As the vehicle gets closer to the obstruction the frequency of the bleeps increases. At 30 centimetres from the obstruction the bleeps become a continuous solid tone, warning you that you should stop the car.

The sensors are on cables of 6m in length, enabling you to wire around the engine bay and under the dashboard where the brain box can be installed securely in a weather-proof environment. The buzzer is on a 2m cable length and should also be mounted under the dashboard.

There are 9 coloured sensors in the range, the colours are baked on so will not crack as can happen with retro spraying. The sensors require a 165.mm hole punch to cut the bumper which is supplied in the box.

Adjustable Brainbox. Our new adjustable brainbox means that you have full control over the detecting distance that your parking sensors have from your car. This is particularly useful for cars with low bumpers or bumpers that are angled at the ground. It is not normally necessary to play with this setting but gives some flexibility with fitting if needed.

Swap Socket Feature. The kit has a watertight swap socket feature based 6 inches from the sensor heads, it makes installation quicker and easier. Also should you ever have a problem with faulty sensors or accident damage in the future.