iEago RC Mini 3 Pro Drone Airdrop System Drone Dropping Payload Release Device Air Drop Thrower with Landing Gear for DJI Mini 3 & Mini 3 Pro Release Fishing Bait/Rescue Tool Drone Accessories, Grey

Feature: 1. It is suitable for Mini 3 / Mini 3 Pro drone, which can be delivered remotely, used for throwing bait, throwing gifts, giving wedding rings, etc.; 2.. The dropper uses USB to charge, quick release. One-key control of delivery through remote control (non-rechargeable); 3. The installed weight is about 40g, which is light and safe. It integrates the design of the fuselage and will not damage the drone; 4. The landing gear is effectively increased by 21mm, and the drone can still take off and land under uneven ground, effectively protecting the safety of the fuselage. Throwing Switch Control Usage: 1. Remote Control Switch: After the airdrop switch is turned on, the state of the airdrop can be controlled through the remote control "up and down". 2. Body Key Control Switch: Press the airdropper on / off button to control the state of the airdropper. Installation Instructions IDropper Installation: 1. Insert the dropper from the bottom of the drone, and snap the two card points into the card slots at the bottom of the drone; 2. Flip to the top of the drone and fasten the buckle. Landing Gear Installation: 1. There are codes 1/ 2/ 3/ 4 in the landing gear buckle corresponding to the left front/ right front/ left rear/ right rear arm, as shown in the figure above; 2. Distinguish the installation direction, and fasten the buckle after installing the arm. Drone Dropper: Maximum load: 100g Built-in battery capacity: 150mAh Standby time about: 12 hours Charging time: 1.5 hours Remote control distance: 100m Charging interface: Type-C Material: Plastic property: Grey Net weight: 78.5g Applicable models: only for DJI Mini 3 / Mini 3 Pro Packing List: 1x Dropper 1x Remote control 1x Remote Control Screwdriver 1 (set) x Raised Landing Gear